E-mail: 745079790@qq.com
Tel: +86-21-57138226
Home > News > Content

News

What Is The Industrial Tumble Dryer?
Jun 01, 2017

Industrial Tumble Dryer heat source from the combustion device, the dryer using downstream heating method. So the need to dry the material, from the feed box, feed slip into the cylinder, that is, by the screw plate to push back. As the dryer tilted place, the material on the one hand in the gravity and rotation under the action of the back to the back, on the other hand the material is copied repeatedly copied, brought to the top and then continue to spread down, so that the material in the tube to form a uniform screen Curtain, full of hot air with the tube for heat exchange, as the material repeatedly Yang Sa, the moisture contained in the drying, so as to achieve the purpose of drying.

Industrial Tumble Dryer can be divided into: rotary dryer, drum dryer, Industrial Tumble Dryer.

Industrial Tumble Dryer scope of application: rotary drum dryer widely used in food, feed, chemical, pharmaceutical, mining and other industries. Equipment work process is as follows: dehydrated wet material into the dryer, the drum in the uniform copy of the copy machine, the material in the dryer evenly dispersed and hot air full contact to speed up the drying heat transfer, mass transfer. In the drying process, the material with the tilt of the copy board and hot air under the effect of the dryer to another star discharge valve discharge products. This machine is suitable for the drying of various kinds of slag materials with water content less than 85%, such as beer distillations, bean dregs, shotchels, slime and so on. It has a good effect on opening up feed resources, reducing feeding cost and reducing environmental pollution effect.

Our main export products are vibration drying equipment, vacuum drying equipment, small and medium-sized grain, food and agricultural and rural products drying equipment, the annual export volume of more than a few hundred, the main export areas are Southeast Asia and other Developing countries, and has opened the door to the European and American markets.

The Industrial Tumble Dryer consists of a rotating drum, which is driven by a belt and hot air around the drum for the evaporation of moisture. Jianxing machinery industry dryer drying tube is the use of drum reversing the principle of drying products to achieve the effect of non-winding, the initial Industrial Tumble Dryer in China has been eliminated, and modern drying are computer automatic control , According to different drying requirements, configure the different drying temperature and drying time. Roller with excellent heat resistance made of stainless steel bright plate, smooth inner wall, can reduce the wear and tear of clothing. Efficient radiator, and with a reasonable guide duct, so that hot air and material contact, greatly improving the efficiency of drying, while saving energy. Large diameter feed port, to facilitate the import and export of materials. Large area of plush collection network, is not easy to cause plush clogging, to protect the air duct of the smooth, thus greatly improving the drying efficiency.

Operating procedures

1, open the door, the dewatering machine after the dehydration of the material evenly rotating in the drum, and then close the door lock.

2, according to the type of fabric, select the appropriate time, adjust the timing device to the required time.

3, press the start button, start the fan, according to user needs, drum rotation direction can choose one-way rotation and two-way rotation. As long as the computer board switch to one-way or two-way, the machine will be required to perform one-way operation or two-way operation. (Forward 25 seconds, stop 5 seconds, reverse 25)

4, often from the observation window to see the flip of the internal fabric, such as the accident should be promptly cut off the power, check the fault.

5, the machine runs to the specified time, the machine will automatically stop running, this time to ask the operator to open the door to check the internal fabric drying, if not the effect, may be appropriate to extend the time.